When installing submersible pumps, it is important to have all the essential components for your pump to function efficiently. Read on as we look at some of the most important products you need to install your submersible pump.
The pump
You will need a submersible pump if you want to install it. It is used to move water from the ground upwards. These pumps are designed to pump water to the surface efficiently.
Check valve
The number of check valves needed and their placement is based on the depth of your pump setting in the well. If you are installing 200 feet or less, you will require one check valve on your pump discharge and one should be on the surface. Setting two hundred feet or deeper will require multiple valves.
Some of the most important things you need to consider during the installation process are the water, weight of piping, the head loss of valves, velocity of the water, friction of the piping and water hammer. If you have more check valves that need installation, you need to check out and take a look at the valves.
Easy tie adapters
You need easy tie adapters to thread them into the discharge on your check valve at the pump and insert them into a poly riser pipe. You will need a second adapter that is threaded into the pitless adapter at your wellhead and connect to the poly riser pipe.
When installing your pump from submersible pumps stockists you should keep in mind that the lug with a hole provides a simple way to securely fasten your safety rope to secure the pump to the wellhead if a pipe failure happens.
Clamps
You need hose clamps that are designed to seal the poly pipe to the insert fittings. This makes them watertight. Using an all-three-hundred-grade stainless steel clamp will ensure that the clamp will last the life of your system for well installations or where maximum corrosion resistance is required.
Heat shrink splice kits
These kits are designed for underwater connection of electricity between the leads on the motor and the pump cable. The connection is typically made by cutting the cables in staggered positions to reduce the diameter of the outer cable. This is very important to reduce the risk of damaging your spice due to abrasion that happens when the pump is lowered into the water.
Torque arrestor
These are designed to keep your pump centred and prevent twisting in the well casing. These arrestors protect the pump cable and are installed directly above the pump.
Safety rope
When installing submersible pumps, you need a safety rope. It can be connected directly to the pump and secured at the head of the well. The main use of the safety rope is to prevent the pipes from separating. This could result in the pup getting lost at the bottom of your well. A safety rope can provide a backup to enable your installer to pull the submersible pump from the well if there is a failure of the riser pipe.
